Wamkelekile kwiiwebhusayithi zethu!
English
ZL2
ibhanile2
ibhanile3
ibhanile4
i-aluminiyam yokusulungekisa ulwelo lwe-aluminiyam yokunyibilika ukukhupha ulwelo lweAluminiyam eOxidized slag
  • i-aluminiyam yokucoca i-flux ye-aluminiyam yokunyibilika ukukhupha i-slag ye-Aluminiyam e-Oxidized

i-aluminiyam yokucoca i-flux ye-aluminiyam yokunyibilika ukukhupha i-slag ye-Aluminiyam e-Oxidized

Xa inani likhulu kakhulu, i-slag iya kuba yi-slag emanzi, kwaye i-slag kunye ne-aluminium ayiyi kuhlukana kakuhle xa i-slag isusiwe. ukuphucula izinga lokusetyenziswa kwesinyithi.
Ukuba isenzeko esimanzi se-slag senzeka xa idosi inkulu, i-agent ye-slagging yenkampani inokusetyenziselwa ukunyanga i-slag emanzi kwaye emva koko isuse i-slag.
C. Ukupakishwa kunye nokugcinwa:
1. Le mveliso ngumgubo omhlophe-grey, ukupakishwa kwangaphakathi yiplastiki eshushu yokutywinwa, i-2kg / ibhegi, ukupakishwa kwangaphandle yibhokisi, 20kg / ibhokisi,
2. Le mveliso ichaphazeleka kumswakama, igcinwe kwindawo epholileyo kunye neyomileyo, ngokungqongqo-ubungqina bomswakama.
3. Ubomi beshelufu: unyaka omnye.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Malunga nale Nto

Ukucokisa ukuguquguquka kubandakanya: ukuguquguquka okuqhelekileyo kokusulungekisa, ukusulungekiswa kokuguquguquka okusebenzayo kunye nokusulungekisa okungatshayiyo

Ukungatshayi okucokisayo
A. Iimpawu zokusebenza:

1. Le mveliso inamandla okususa ngokufanelekileyo ukufakwa kunye neegesi kwi-aluminium etyhidiweyo, kwaye i-aluminium etyhidiweyo ihlambulukile emva kokusetyenziswa, ngaloo ndlela iphucula kakhulu umgangatho weemveliso ze-aluminium alloy.

2. Isixa sokusetyenziswa kwale mveliso sincinci, esiyi-1/4 ~ 1/2 ye-agent yokucoca yendabuko, kwaye ayiyi kwandisa iindleko zokusetyenziswa.

3. Le mveliso ingumsi kwaye ihambelana nokusingqongileyo i-ejenti yokusulungekisa ephezulu eqaliswe ngokweemfuno zesizwe zokhuseleko lokusingqongileyo.

B. Indlela yokusebenzisa, sebenzisa ubushushu kunye nethamo:

1. Indlela yokusetyenziswa: Indlela yokutofa kwegesi engasebenziyo: sebenzisa isixhobo sokutofa ukutshiza i-ejenti yokucoca i-powder kwi-melted ngokulinganayo, isantya senaliti kufuneka silawulwe ngokungqongqo, singakhawulezi kakhulu,
Ukuba ikhawuleza kakhulu, umphumo wokucoca uya kuhla.Isantya sokutofa kufuneka silawulwe kwikota yesantya semveli.Emva kokutshiza kunye nokudlala, gxuma ngokulinganayo, kwaye uvumele ukuba ume malunga nemizuzu eyi-10 ngaphambi kokususa i-slag.

2. Ubushushu bokusebenza: 700℃~750℃.Umsi uveliswa xa ubushushu buphezulu kakhulu.

3. Isixa salo mveliso esongeziweyo: 0.05-0.12% yemali ye-aluminium ukuba iphathwe.

Imveliso Dispaly

ukuguquguquka kokucoca
  • Ngaphambili:
  • Okulandelayo:

    • Iindidi zeemveliso

    Cofa u-enter ukukhangela okanye i-ESC ukuvala